First, how to analysis a pool heater is noisy or not? We can measure at 1 meter distance from the pool heat pump and the noise level is displaced in dBA. So when you check the data of pool heat pumps of different brands, you should notice the noise level they provided is at 1 meter, 5 meters or 10 meters.
There are several major components in an INVERPAC: compressor, titanium heat exchanger, evaporator, fans, control panel, and pressurizing valve. Most of the noises of the pool heat pump come from the fan and the compressor. The noise from the fan will depend on the rotatory speed, air circulation, and flow of pressure. When airflow passes through the heat exchanger, it generates aerodynamic noises. The structure of the exchanger and the speed of the air affect the noise level much.
The INVERPAC usually makes mild humming or whirring sounds while it’s running. And there will be slight noise on circuits and electric valves when electricity passes through. The noise is not bothering, but you should pay attention accordingly when it sounds different.
Every time, when the switches on or off, the compressor produces louder noises. So it’s recommended to install your INVERPAC pool heat pump on a fix position. An experienced contractor will install the pool heater in a position where it wouldn't make big noises when it turns on and off.
The INVERPAC use inverter technology to utilize the speed of fans and the compressor. Besides that, it uses a lot of other measures to reduce the noise.
● Vibration Pads - when installing the INVERPAC pool heat pump, install it with these pads which will reduce vibrations going to the ground surface.
● Sound dampening cushion - The INVERPACusing sound dampening cushion inside the pool heater to minimize vibration sounds caused by the compressors, fan motors or other components.
● Fan Modification - fans produce a lot of noise. The INVERPAC use full inverter technology to modify the speed of the fans accordingly, achieve the best efficiency at the lowest cost and lease noise.
By the above measures, INVERPAC pool heat pump can reduce the noise output by almost 17Dba. Much lower than other brands.
To low down the operation noise of a pool heat pump, we must consider a lot of things, the brands of the pool heat pump, installation position, detail design, inside structure etc. We strongly recommend you to choose the INVERPAC , besides its high efficiency and stable operation, its full inverter technology ensures its operation at a whisper-quiet level which is down to 39 dBA.
First, how to analysis a pool heater is noisy or not? We can measure at 1 meter distance from the pool heat pump and the noise level is displaced in dBA. So when you check the data of pool heat pumps of different brands, you should notice the noise level they provided is at 1 meter, 5 meters or 10 meters.