The INVERPAC full inverter Heat pump is absorbing the heat from the air and transfer heat energy into the water. So, there are 4 parts very important:
The fins are the key factor, not the larger the better, the size & thickness of the fins, the gap, the surface treatment, the coating, the temperature and the wind speed are affecting the efficiency of how much heat can be absorbed from the air. Inverpac does thousands of tests to get the best balance.
One of the most important parts about how we can achieve high COP. A full inverter compressor can adjust the flowing speed and pressure of the refrigerant (R32) accurately, thus to push them into the heat exchanger at the best temperature and flow rate, and it's a live adjustment control compressor, Inverpac can maintain your temperature at the pre-set value with 0.1 ℃ precision. Waste less, save more.
The twisted spiral pure titanium heat exchanger: maximized the contact area between refrigerant and pool water, and it greatly reduce the heat loss and increase the heat exchange efficiency.
All parts are linked and controlled by the INVERPAC smart centre, the whole system is not simply piling up the bricks, but to linked every part together, make them in best cooperation and combine them as an integrate and efficient system.
Of course, not only the above 4 points but there are too much to share, but seeing is believing, the real heat pump is much better than what I describe, please contact our sales staff to get further information and free consult service. For more information, feel free to contact us to explore more about pool heat pumps!